El X-ASR es el primer mosfet de cuarta generación del mundo. Ofrece protección contra la inversión de polaridad. Ahorra tiempo, espacio y dinero ya que no necesita ningún fusible adicional. Funciona como protección electrónica, mejorando la seguridad y durabilidad de tu AEG. Esta diseñado para muelles tipo M120, pero es capaz de soportar muelles de hasta M150 siempre que el motor y los engranajes sean capaces de moverlos


-Mosfet: Dirige la energía directamente de la batería al motor, pasando por encima de los contactos mecánicos del gatillo. El resultado de eso es un mayor nº de disparos por minuto (ROF) y una respuesta mas rápida del gatillo. Además los contactos están protegidos contra quemaduras.
-Ofrece total compatibilidad con micro switches y asegura la completa resistencia al rebote de los contactos por vibración.  Tu AEG gana en respuesta y ROF, mientras que el mosfet tiene menos tendencia al sobrecalentamiento.



What makes X-ASR so special?

  • No additional fuse required in AEG installation
  • Automatic resettable protection against reverse polarity – protects motor and the MOSFET itself in the event of reverse polarity. Reverse connection will not damage the MOSFET or motor; the AEG will work again once you connect the battery in the right way.
  • Smart fuse – protects MOSFET in case of motor jam. It prevents from overheating, overloading and overcurrenting. The MOSFET is protected against short circuit of signal and motor wires. In case of too strong AEG configuration, the smart fuse will turn off the MOSFET in order to prevent overheating.
  • Built-in self-test – 2 LEDs allow for quick troubleshooting
  • Conformal coating – Military Specification MIL-V-173C provides resistance to difficult atmospheric conditions



What is your AEG protected from when having X-ASR?

  • Simple motor jam consequences – after a motor jam, the MOSFET will not be damaged due to too high current or overheating
  • Damage resulting from battery reverse polarity – since R/C mini-tamiya connector has different polarity than the airsoft one, lack of experience or precaution while connecting the battery will cause no damage to it
  • Consequences of using weak NiCd/NiMH batteries – the MOSFET will not be damaged due to too low voltage
  • Damage to insulation of AEG installation and short circuit
  • Harms caused by poor weather conditions


Behind the lines

Considering its functions, X-ASR is an improved version of NanoASR MOSFET. However, when designing X-ASR, we focused even more on its reliability.

The most important assumption was that it must be installed without any additional fuse. All the other MOSFETs we offer require supplementary fuse in AEG installation. To eliminate such necessity, we implemented the smart fuse and protection against reverse polarity in X-ASR.


Get ready for these amazing functions:


We have developed an electronic fuse with an accurate current sensor. A combination of current, voltage and temperature measurements makes your AEG installation highly reliable. It protects the MOSFET against overheating, overloading and short-circuiting. If your airsoft gun becomes jammed, the function protects the motor and battery against damage.


Do you want to achieve a higher ROF and faster trigger response? Are you planning a power upgrade of your gun? In that case, you need a MOSFET.

It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you gain a higher ROF of the gun and a faster trigger response.


This provides full compatibility with the micro-switches. It ensures full resistance to contact bounce (vibration). You gain a bigger ROF, a faster trigger response and your MOSFET is less prone to overheating.


This allows you to quickly check whether the device is working properly. It helps to locate where the problem lies when anything goes wrong.


Thanks to its special conformal coating, our product is resistant to atmospheric conditions (Military Specification MIL-V-173C).


Información adicional

Peso 0.1 kg

Todos nuestros productos





Powered by WhatsApp Chat